Control panel address

If two control panels have been connected to the ventilation unit, the panel addresses must be different. In other words, each control panel must have a unique address. If only one control panel is used, its address can be any number between 10 and 19.

Important:

If your system uses multiple control panels, connect them one at a time.

To set a control panel address:

  1. Select Settings.
  2. Select Expert settings with the arrow buttons.
  3. Select OK.
  4. Select I/O and bus settings with the arrow buttons.
  5. Select OK.
  6. Select Control panel address
  7. Select OK.
  8. The Control panel address screen opens.
  9. Use the Plus and Minus buttons to set the control panel address. You can set the address between 10 and 19.
  10. Select OK.
The control panel address has now been set.