Basic fan settings (CFi)

The basic air flow setting values can be adjusted on this configuration page. The operation of these values is based on the same principle as the air flow adjustment that is carried out during setup.

  • The set value for Away mode air flows cannot be higher than the At Home or Boost mode air flows.
  • The set value for At Home mode air flows cannot be lower than the Away mode air flows or higher than the Boost mode air flows.
  • The set value for Boost mode air flows cannot be lower than the At Home or Away mode air flows.

This configuration page is designed for fine tuning these values. If the ventilation unit air flows need to be measured again, it is recommended to restart the setup process.

  1. Select Settings.
  2. Select Expert settings with the arrow buttons.
  3. Select OK.
  4. Select Basic fan settings.
  5. Set the supply and extract air flows.
  6. Select OK.