MyVallox Control setup

Use one of the following to set up the ventilation unit
  • MyVallox Control panel
  • MyVallox Touch panel
  • MyVallox Home user interface.
Important:

The basic fan settings must be set according to the ventilation plan. Do not change these settings.

This section describes the setup of the Vallox MV ventilation unit on the MyVallox Control panel step by step.
Tip:

If you make a mistake when configuring the settings during guided setup and move to the next phase, finish the guided setup and then change the incorrect setting.

Important:

We recommend you always use the latest software version. Check and download the latest version at https://cloud.vallox.com either before or immediately after setup. See section Updating the unit software.