Browsing the Away mode information

The main view shows a summary of the mode information.

The first mode information screen opens:

This screen shows the following information:

• Supply air — Indicates the actual temperature of the air flowing into the apartment and the supply air temperature setting (in parentheses) if the supply air is warmer than the value set.
• Extract — Indicates the current extract air flow (l/s or m³/h). The extract air flow setting is determined automatically based on the supply air flow, and the user cannot adjust it.
• Supply — Indicates the current supply air flow (l/s or m³/h). If the ventilation unit is automatically boosting the air flow in response to an increased humidity or carbon dioxide level or a need for cooling, the actual air flow can be higher than the set value. The set value is shown in brackets.
• Cell status — The ventilation unit has the following HR cell modes:
  • Heat recovery — The HR cell heats the air flowing in from outdoors with extract air.
  • Cold recovery — The HR cell cools the air flowing in from outdoors with extract air when the temperature of the air that is extracted from the apartment is two degrees lower than the outdoor temperature.
  • Bypass — The inflowing air bypasses the HR cell.
  • HR cell defrost in progress — The HR cell is being defrosted.

This screen shows the following information:

• Humidity — Indicates the highest relative humidity value measured by the sensors.
• Carbon dioxide — Indicates the highest carbon dioxide value measured by the sensors.
• Replace filters — Indicates the next recommended filter replacement date.
• Time in operation — Indicates for how long the unit has been running.