Week clock

The week clock allows you to pre-set a weekly ventilation programme for the ventilation unit. You can set one of the following modes for each hour of the week:

  • At Home — The At Home mode is used.

  • Away — The Away mode is used.

  • Boost — The Boost mode is used.

  • Custom — The Custom mode is used.

  • Standby mode — The ventilation unit has been turned off.

  • Empty — The previous mode is used.

Note:

If you change the mode manually when the week clock is on, the selected mode will remain active until the week clock switches to the next mode in the programme.

If ventilation is being controlled by the humidity, carbon dioxide or VOC sensors, they will adjust the fan speed regardless of whether a mode has been manually selected or selected by the week clock.

Important:
To ensure that the indoor air presents no harm to health and remains optimal also for the structures of the building, ventilation must be kept on without interruptions. It is recommended that ventilation be left turned on during long holidays also. This keeps the indoor air fresh and prevents humidity from condensing in the ventilation ducts and structures. It also reduces the risk of moisture damage.
Important:
When using the Custom mode, the apartment must not remain overpressured for a long time.
Tip:

To enable or disabled the week clock, press OK in the Week clock view for a few seconds: