MyVallox Touch setup

Use one of the following to set up the ventilation unit
  • MyVallox Control panel
  • MyVallox Touch panel
  • MyVallox Home user interface.

This section describes, step by step, the setup of the ventilation unit by using the MyVallox Control panel.

Important:

The basic fan settings must be set according to the ventilation plan. Do not change these settings.

Tip:

If you make a mistake when configuring the settings during guided setup and move to the next phase, finish the guided setup and then change the incorrect setting.

Important:

We recommend that the latest software version be always used. See and download the latest version at https://cloud.vallox.com either before or immediately after setup. See also Updating the unit software (MyVallox Touch).

Note:

The MyVallox Touch control panel automatically switches to the sleep mode when the Sleep time set in the display settings has elapsed. You can wake up the control panel by touching the touch screen.