Week clock

Use the week clock to set the ventilation unit a weekly ventilation programme. You can select one of the following modes for every hour of the week:
  • At Home — At Home mode on.
  • Away — Away mode on.
  • Boost — Boost mode on.
  • Custom — Custom mode on.
  • Standby mode — Standby mode on.
  • Blank — Previous mode on.
Note:

If you change the mode manually when the week clock is used, the selected mode will be active until the next period programmed in the week clock.

If ventilation is controlled by the humidity, carbon dioxide or VOC sensors, the sensors adjust the fan speed regardless of the manually selected mode or week clock settings.

Tip:

To enable or disabled the week clock, press OK in the Week clock view for a few seconds: