Boost profile
Tip
Use the Right arrow button to view the Boost profile settings.
To make the Boost profile settings:
-
The Boost profile display of the setup wizard opens:
Note
Once you have set the fan speed for the At home profile (see the section called “At home profile”), the fan speed for the Boost profile will by default be set to +30% of the At home profile fan speed. It is recommended that this fan speed setting be used for the Boost profile. However, the setting can be changed as required.
-
Use the Plus and Minus buttons to set the Boost profile fan speed as a percentage of the maximum output ratio.
-
Select Right arrow. The temperature setup display opens:
-
Use the Plus and Minus buttons to set the desired temperature for the Boost profile.
You can adjust the temperature in the range +5°C – +25°C.
-
Select Right arrow.
The setup for automatic fan speed control based on the relative humidity opens.
-
Use the Plus and Minus buttons to select whether the automatic fan speed control, based on the relative humidity, is used or not.
-
Select Right arrow.
The setup for automatic fan speed control based on the carbon dioxide level opens.
-
Use the Plus and Minus buttons to select whether the automatic fan speed control, based on the carbon dioxide level, is used or not.
-
Select Right arrow.
A display for setting the profile timer opens.
-
Use the Plus and Minus buttons to select whether the profile timer function is used or not. The options are:
-
On — When the timer is on, the Boost profile is used only for the period specified in the timer.
-
Off — When the timer is off, the Boost profile is used until you (or the week clock) change the profile.
-
-
Select Right arrow.
A display for setting the profile timer duration opens.
-
Use the Plus and Minus buttons to set the profile timer duration in minutes. This value indicates the duration of enhanced ventilation when the Boost profile is activated.
-
Select OK:
The Boost profile settings are now complete.