At home profile
Tip
Use the Right arrow button to view the At home profile settings.
To make the At home profile settings:
-
The At home profile display of the setup wizard opens:
Note
By default, the At home profile uses the higher of the basic ventilation fan speeds set in the previous step. It is recommended that this basic ventilation setting be used for the At home profile. However, the setting can be changed as required.
-
Use the Plus and Minus buttons to set the At home profile fan speed as a percentage of the maximum output ratio.
-
Select Right arrow. The temperature setup display opens:
-
Use the Plus and Minus buttons to set the desired supply air temperature for the At home profile.
You can adjust the temperature in the range +5°C – +25°C.
-
Select Right arrow.
The setup for automatic fan speed control based on the relative humidity opens.
-
Use the Plus and Minus buttons to select whether the automatic fan speed control, based on the relative humidity, is used or not.
-
Select Right arrow.
The setup for automatic fan speed control based on the carbon dioxide level opens.
-
Use the Plus and Minus buttons to select whether the automatic fan speed control, based on the carbon dioxide level, is used or not.
-
Select OK:
