Week clock

The week clock allows you to pre-set a weekly ventilation programme for the ventilation unit. For each hour of the week, one of the following modes can be configured:

At Home — At Home mode on.
Away — Away mode on.
Boost — Boost mode on.
Custom — Custom mode on.
Standby mode — Standby mode on.
Blank — Previous mode on.

The week clock is shown in the figure below:

Note:

If you change the mode manually when the week clock is used, the selected mode will be active until the next period programmed in the week clock.

If ventilation is controlled by the humidity, carbon dioxide or VOC sensors, the sensors adjust the fan speed regardless of the manually selected mode or week clock settings.