Installation
This chapter describes the installation of the Vallox ventilation unit.
Only a qualified technician is allowed to install and set up the unit. Electrical installation and connection work must be carried out by an electrician in line with local regulations.
Check the package contents before installation and make sure that all parts are in good condition. Store the product in a dry place (indoors).
Check the dimensions and weight of the product from the technical specification of the unit.
The ventilation unit must be installed in a dry place where the temperature does not drop below +10°C. When installed without its enclosure, the unit must be placed in a place where its running noise is not bothersome; for example, a storage room, utility room or a false ceiling.
Avoid mounting the ventilation unit to a hollow partition wall or a bedroom wall, or prevent the conduction of noise through the wall.
The whole length of the outdoor air duct to the unit and the exhaust air duct from the unit must be insulated using closed-cell insulation. Closed-cell insulation is needed for the duct component that runs through warm spaces.
The ventilation unit must be installed so that it can be connected to a LAN cable. The LAN cable must be able to be connected to a router.