Exploded view and list of spare parts
| No. | Part | No. | Part |
|---|---|---|---|
| 1b | Door latch | 6d |
Liquid radiator assembly |
| 1c | Door finger screw | 6e |
Liquid radiator valve |
| 1f | Upper door | 6f | Liquid radiator actuator |
| 1g | Lower door | 6g | Liquid radiator control relay |
| 2a | HR cell | 7a | Safety switch |
| 2b | Lower support of the HR cell | 8b | Base assembly |
| 2c | Upper sealing strip of the HR cell | 8c |
Front panel of the base |
| 3a | Extract air fan | 9a |
Ceiling bushing Ceiling feedthrough seal |
| 3c | Supply air fan | 10a | MyVallox control panel |
| 3m | Anemometer | 11a |
Internal humidity and carbon dioxide sensor |
| 3n |
Hall sensor circuit board | 11c |
MyVallox carbon dioxide sensor |
| 4a | Fine filter for supply air | 11d | MyVallox humidity sensor |
| 4b | Coarse filter for supply air | 11e | MyVallox VOC sensor (optional) |
| 4c | Coarse filter for extract air | 11g | NTC sensor kit |
| 4d | Filter stand | 13a | Siphon Vallox Silent Klick |
| 5a | Bypass damper of the HR cell | 14b | Motherboard |
| 5b |
Bypass damper actuator | 14c | Glass tube fuse 63 mA slow 5 x 20 mm |
| 5f |
Bypass arm | 14d | RJ45 extension cable |
| 6a | Post-heating resistor | 15b | Connection box |
| 6b | Additional heating resistor |
NOTE:
If the fan’s anemometer or the Hall sensor’s circuit board breaks during the unit’s warranty period, the entire fan must be replaced. After the warranty period, only the fan’s anemometer and/or the Hall sensor’s circuit board can be replaced instead of the entire fan.