Away mode

Tip:

You can browse the Away mode settings with the Right arrow button.

To make the Away mode settings:

  1. The display of the setup wizard of the Away mode opens:
    Note:

    Once you have set the fan speed for the At home mode (see At home mode), the fan speed for the Away mode will by default be set to -30% of the At home mode fan speed. It is recommended that this fan speed setting be used for the Away mode. However, the setting can be changed as required.

  2. Use the Plusand Minus buttons to set the fan speed for this mode as a percentage of the maximum output ratio.
  3. Select Right arrow. The temperature setup display opens:
  4. Use the Plus and Minus buttons to set the desired supply air temperature for this mode.
    You can adjust the temperature setting in the range +5°C ... +25°C.
  5. Select Right arrow. The setup for automatic fan speed control based on the relative humidity of air opens:
  6. Use the Arrow buttons to select whether the automatic fan speed control, based on the relative humidity of air, is used or not.
  7. Select Right arrow. The setup for automatic fan speed control based on the carbon dioxide level opens:
  8. Use the Arrow buttons to select whether the automatic fan speed control, based on the carbon dioxide level, is used or not.
  9. Select OK.
The Away mode settings are now complete.