At home mode

Tip:

You can browse the At home mode settings with the Right arrow button.

To make the At home mode settings:

  1. The display of the setup wizard of the At home mode opens:
    Note:

    By default, the fan speed used in the At home mode is the higher of the percentage values set for basic ventilation airflows. We recommend that this basic ventilation setting be used with the At home mode. However, the setting can be changed as required.

  2. Use the Plusand Minus buttons to set the fan speed for this mode as a percentage of the maximum output ratio.
  3. Select Right arrow. The temperature setup display opens:
  4. Use the Plus and Minus buttons to set the desired supply air temperature for this mode.
    You can adjust the temperature setting in the range +5°C ... +25°C.
  5. Select Right arrow. The setup for automatic fan speed control based on the relative humidity of air opens:
  6. Use the Arrow buttons to select whether the automatic fan speed control, based on the relative humidity of air, is used or not.
  7. Select Right arrow. The setup for automatic fan speed control based on the carbon dioxide level opens:
  8. Use the Arrow buttons to select whether the automatic fan speed control, based on the carbon dioxide level, is used or not.
  9. Select OK.