Boost mode

To make the Boost mode settings:

  1. Select the Boost mode.
    Note:

    Once you have set the fan speed for the At home mode (see At home mode), the fan speed for the Boost mode will by default be set to +30% of the At home mode fan speed. It is recommended that this fan speed setting be used for the Boost mode. However, the setting can be changed as required.

  2. Set the fan speed value for this ventilation mode as a percentage of the maximum by moving the blue Fan speed slider. If the slider is moved to the left, the fan speed value is reduced. If you move the slider to the right, the fan speed value is increased.
  3. Set the desired supply air temperature for this ventilation mode by moving the Supply air temperature setting slider. If the slider is moved to the left, the desired supply air temperature is reduced. If the slider is moved to the right, the desired supply air temperature is increased.
    You can adjust the temperature in the range +5°C ... +25°C. The recommended temperature is +15°C or 2–3°C below the room temperature.
  4. Use the On/Off button on the right edge of the Humidity field to turn the automatic fan speed control based on the relative humidity of air on or off.
    • When the value is On, the automatic fan speed control is turned on.
    • When the value is Off, the automatic fan speed control is turned off.
  5. Use the On/Off button on the right edge of the Carbon dioxide field to turn the automatic fan speed control based on the carbon dioxide level on or off.
    • When the value is On, the automatic fan speed control is turned on.
    • When the value is Off, the automatic fan speed control is turned off.
  6. Turn the mode timer function on or off by using the On/Off button below the Timer text.
    • On— When the timer is on, the selected ventilation mode will be used only for the period specified in the timer.
    • Off— When the timer is off, the selected ventilation mode will be used until the mode is changed, either manually or automatically by the week clock.
  7. Set the mode timer duration by entering the hours and minutes in the time field of the Duration field.
The Boost mode settings are now complete.