At home mode

To make the At home mode settings:

  1. Select the At home mode.
    Note:

    By default, the At home mode uses the higher of the basic ventilation air flows (see Adjusting the supply and extract air flows) set in the previous step. We recommend that this basic ventilation setting be used with the At home mode. However, the setting can be changed as required.

  2. Set the fan speed value for this ventilation mode as a percentage of the maximum by moving the blue Fan speed slider. If the slider is moved to the left, the fan speed value is reduced. If you move the slider to the right, the fan speed value is increased.
  3. Set the desired supply air temperature for this ventilation mode by moving the Supply air temperature setting slider. If the slider is moved to the left, the desired supply air temperature is reduced. If the slider is moved to the right, the desired supply air temperature is increased.
    You can adjust the temperature in the range +5°C ... +25°C. The recommended temperature is +15°C or 2–3°C below the room temperature.
  4. Use the On/Off button on the right edge of the Humidity field to turn the automatic fan speed control based on the relative humidity of air on or off.
    • When the value is On, the automatic fan speed control is turned on.
    • When the value is Off, the automatic fan speed control is turned off.
  5. Use the On/Off button on the right edge of the Carbon dioxide field to turn the automatic fan speed control based on the carbon dioxide level on or off.
    • When the value is On, the automatic fan speed control is turned on.
    • When the value is Off, the automatic fan speed control is turned off.
The At home mode settings are now complete.