Week clock

The week clock allows you to pre-set a weekly ventilation programme for the ventilation unit. For each hour of the week, one of the following modes can be configured:

  • At home — The At home mode is in use.
  • Away — The Away mode is in use.
  • Boost — The Boost mode is in use.
  • Empty — The previous mode is used.

The week clock is shown in the figure below:

Note:

If you change the mode manually when the week clock is turned on, the selected mode will remain active until the week clock switches to the next mode in the programme.

If ventilation is being controlled by the humidity, carbon dioxide or VOC sensors, they will adjust the fan speed regardless of whether a mode has been manually selected or selected by the week clock.