Away profile
To make the Away profile settings:
-
Select Away.
Note
Once you have set the fan speed for the At home profile (see the section called “At home profile”), the fan speed for the Away profile will by default be set to -30% of the At home profile fan speed. It is recommended that this fan speed setting be used for the Away profile. However, the setting can be changed as required.
-
Set the fan speed value of the Away profile as a percentage of the maximum by moving the blue Fan speed slider. If the slider is moved to the left, the fan speed value is reduced. If you move the slider to the right, the fan speed value is increased.
-
Set the desired supply air temperature of the Away profile by moving the blue Supply air slider. If the slider is moved to the left, the desired supply air temperature is reduced. If the slider is moved to the right, the desired supply air temperature is increased.
You can adjust the temperature in the range of +5°C – +25°C. The recommended temperature is +15°C or 2–3°C below the room temperature.
-
Use the On/Off button on the right edge of the Humidity field to turn the automatic fan speed control based on the relative humidity of air on or off.
-
When the value is On, the automatic fan speed control is turned on.
-
When the value is Off, the automatic fan speed control is turned off.
-
-
Use the On/Off button on the right edge of the Carbon dioxide field to turn the automatic fan speed control based on the carbon dioxide level on or off.
-
When the value is On, the automatic fan speed control is turned on.
-
When the value is Off, the automatic fan speed control is turned off.
-
The Away profile settings are now complete.