At home profile
To make the At home profile settings:
-
Select At home profile.
Note
By default, the At home profile uses the higher of the basic ventilation air flows (see the section called “Adjusting the supply and extract air flows”) set in the previous step. It is recommended that this basic ventilation setting be used for the At home profile. However, the setting can be changed as required.
-
Set the fan speed value of the At home profile as a percentage of the maximum by moving the blue Fan speed slider. If the slider is moved to the left, the fan speed value is reduced. If you move the slider to the right, the fan speed value is increased.
-
Set the desired supply air temperature of the At home profile by moving the blue Supply air slider. If the slider is moved to the left, the desired supply air temperature is reduced. If the slider is moved to the right, the desired supply air temperature is increased.
You can adjust the temperature in the range of +5°C – +25°C. The recommended temperature is +15°C or 2–3°C below the room temperature.
-
Use the On/Off button on the right edge of the Humidity field to turn the automatic fan speed control based on the relative humidity of air on or off.
-
When the value is On, the automatic fan speed control is turned on.
-
When the value is Off, the automatic fan speed control is turned off.
-
-
Use the On/Off button on the right edge of the Carbon dioxide field to turn the automatic fan speed control based on the carbon dioxide level on or off.
-
When the value is On, the automatic fan speed control is turned on.
-
When the value is Off, the automatic fan speed control is turned off.
-
The At home profile settings are now complete.