Panel address
If two control panels have been connected to the ventilation unit, they must have different addresses. In other words, each control panel must have a unique address. If only one control panel is used, its address can be any number between 10—19.
Important
If more than one control panel is used, they must be connected one at a time.
To set the panel address:
-
Select Settings:
-
Use the arrow buttons to select Expert settings:
-
Select OK:
-
Use the arrow buttons to select I/O and bus settings:
-
Select OK:
The Panel address display 1/4 opens.
-
Select OK:
-
The Panel address display opens.
-
Use the Plus and Minus buttons to set the panel address. You can choose the address between 10—19.
-
Select OK:
The panel address is now set.