Setting the method for adjusting the temperature
To change the method for adjusting the temperature of the air to the apartment:
-
Select Settings:
-
Use the arrow buttons to select Expert settings:
-
Select OK:
-
Use the arrow buttons to select Sensor settings:
-
Select OK:
The Sensor settings display opens:
-
Use the Up arrow and Down arrow buttons to select the temperature of the air to the apartment.
The options are:
-
Supply air — Supply air setting uses the post-heating radiator when the temperature of the air coming through the heat recovery cell is lower than the set supply air value. The heat recovery cell is bypassed when the outdoor temperature differs from the set supply air temperature by two degrees and the outdoor temperature is cooler than the extraction air temperature.
-
Extract air — Extract air setting changes the supply air adjustment setting automatically based on the temperature of the air extracted from the apartment (max. 10 °C).
-
When the Cooling — Cooling setting is used, the ventilation unit operates as when the Extract air setting is used but it also boosts the ventilation where required until the profile is switched.
-
-
Select OK:
The method for adjusting the temperature control is now set.