Select Control panel.

Use the mouse to select the Boost profile in the Profiles area.

The basic information of the selected profile is displayed:

Select Edit in the right top corner of the area:

The profile display will open in editing mode.

Set the fan speed value of the Boost profile as a percentage of the maximum by moving the blue Fan speed slider. If the slider is moved to the left, the fan speed value is reduced. If you move the slider to the right, the fan speed value is increased.

Set the desired supply air temperature of the Boost profile by moving the blue Supply air slider. If the slider is moved to the left, the desired supply air temperature is reduced. If the slider is moved to the right, the desired supply air temperature is increased.

You can adjust the temperature in the range of +5°C – +25°C. The recommended temperature is +15°C or 2—3°C below the room temperature.

Turn the automatic fan speed control based on the relative humidity of air on or off using the On/Off button on the right edge of the Humidity field.

Use the On/Off button on the right edge of the Carbon dioxide field to turn the automatic fan speed control based on the carbon dioxide level on or off.

Turn the profile timer function on or off by using the On/Off button below the Timer text.

Set the Boost profile timer duration by entering the hours and minutes in the time field of the Duration field.

Select OK: