Modifying the Fireplace profile settings
To edit the Fireplace profile settings:
-
Select Control panel.
-
Use the mouse to select the Fireplace profile in the Profiles area.
The basic information of the selected profile is displayed:
-
Select Edit in the right top corner of the area:
The profile display will open in editing mode.
-
Set the supply air fan speed value of the Fireplace profile as a percentage of the maximum by moving the blue Supply air slider. If the slider is moved to the left, the supply air fan speed is reduced. If the slider is moved to the right, the supply air fan speed is increased.
Note
It is recommended that a higher supply air fan speed be used in the fireplace profile to create overpressure in the ventilation zone. Reducing the extract air fan speed is not recommended.
-
Set the extract air fan speed value of the Fireplace profile as a percentage of the maximum by moving the blue Extract air slider. If the slider is moved to the left, the extract air fan speed is reduced. If the slider is moved to the right, the extract air fan speed is increased.
-
Turn the profile timer function on or off by using the On/Off button below the Timer text.
-
When the value is On, the Fireplace profile is used only for the period specified in the timer.
-
When the value is Off, the Fireplace profile will be used until you (or the week clock) change it.
Important
Do not turn the timer function off if there is no timer in the external fireplace switch.
-
-
Set the Fireplace profile timer duration by entering the hours and minutes in the time field of the Duration field.
-
Select OK:
The Fireplace profile settings are now complete.