Viewing the Fireplace profile information


Prev		Next

To view the Fireplace profile settings:

Select Control panel.
Use the mouse to select the Fireplace profile in the Profiles area.
The basic information of the selected profile is displayed:

This area shows the following information:
- Supply air fan — Indicates the supply air fan speed as a percentage of the maximum. The volume in litres per minute is given in brackets.
- Extract air fan — Indicates the extract air fan speed as a percentage of the maximum. The volume in litres per minute is given in brackets.
- Duration — Indicates the duration of enhanced ventilation when the Fireplace profile is activated. The value is in the form hh:mm.
- Cell status — Indicates the status of the ventilation unit heat recovery cell. The status options are:
  - Heating — The heat recovery cell heats the air streaming in from outdoors with extraction air.
  - Cooling — The heat recovery cell cools the air streaming in from outdoors with extraction air when the temperature of the air that is extracted from the apartment is two degrees lower than the outdoor temperature.
  - Bypass — The inflowing air bypasses the heat recovery cell.
  - Defrosting — The heat recovery cell is being defrosted.
The profile display in the Information area contains more information.

See also the section called “Symbols for ventilation profiles”.