Viewing the Boost mode information

Press the Change mode button

until the Boost mode icon appears on the display:

Please wait until the main display of the Boost mode opens:

The main display provides a summary of mode information.

Select Mode information:

The first information display of the mode opens:

This display shows the following information:

Supply air — Indicates the temperature of the air blown into the apartment and its set value (in brackets), if the supply air is warmer than the set value.
Outdoor air — Indicates the outdoor temperature.
Fan speed — Indicates the fan speed. If the automatic fan speed boost is turned on, the set value is shown in brackets first followed by the actual fan speed.
Cell status — The statuses of the ventilation unit heat recovery cell are:
- Heat recovery — The heat recovery cell heats the air flowing in from outdoors with extract air.
- Cool recovery — The heat recovery cell cools the air flowing in from outdoors with extract air when the temperature of the air that is extracted from the apartment is two degrees lower than the outdoor temperature.
- Bypass — The inflowing air bypasses the heat recovery cell.
- Defrosting the HR cell — The heat recovery cell is being defrosted.

Select Right arrow. The second information display of the mode opens:

This display shows the following information:

Humidity — Indicates the highest relative humidity of air measured by the sensors.
Carbon dioxide — Indicates the highest carbon dioxide level measured by the sensors.
Replace filters — Indicates the next recommended filter replacement date.
Time in operation — Indicates how long the unit has been running.