Viewing the relative humidity of air and carbon dioxide level statistics

To view the relative humidity of air and carbon dioxide statistics:

  1. Select Settings.
  2. Use the Arrow buttons to select Temperatures and sensors:
  3. Select OK.
    Tip:

    The temperature and sensor data can also be viewed by selecting the temperature button on the mode display.

    The summary display of temperatures and sensors opens:

  4. Select Right arrow.

    The relative humidity of air values measured by humidity sensors 1-3 are displayed.

    Note:

    A power cut erases daily statistics.

  5. Select Statistics:

    A graph opens on the display showing the relative humidity of air recorded over the last 24 hours by the sensor with the highest levels:

  6. To view weekly statistics, select Plus:
    A graph opens on the display showing the relative humidity of air recorded over the last seven days by the sensor with the highest levels:
  7. Return to the daily statistics by selecting Minus:
  8. Return to the sensor group selection by selecting Back:
  9. Select Right arrow.

    The relative humidity of air values measured by the humidity sensors 4-6 are displayed. Statistics can be viewed as with the sensors 1-3.

  10. Return to the sensor group selection by selecting Back:
  11. Select Right arrow.

    The carbon dioxide values measured by carbon dioxide sensors 1-3 are displayed.

  12. Select Statistics:
  13. A graph opens on the display showing the carbon dioxide level recorded over the last 24 hours by the sensor with the highest values:
  14. To view weekly statistics, select Plus:
  15. A graph opens on the display showing the carbon dioxide level recorded over the last seven days by the sensor with the highest values:
  16. Return to the daily statistics by selecting Minus:
  17. Return to the sensor group selection by selecting Back:
  18. Select Right arrow.
    The carbon dioxide values measured by carbon dioxide sensors 4-6 are displayed. Statistics can be viewed as with the sensors 1-3.
  19. Return to the sensor group selection by selecting Back:
  20. To exit the menu, select Back: