Heating settings

Important:

Do not change the heating settings unless assisted by a HVAC specialist.

  1. Select Settings.
  2. Use the Arrow buttons to select Expert settings.
  3. Select OK.
  4. Use the Arrow buttons to select Heating settings:
  5. Select OK.
    The Heating settings display opens:
  6. Use the arrow buttons to select the post-heating method:
    • Electric resistor
    • Liquid radiator
    • Not in use
  7. Select Right arrow.
  8. Use the arrow buttons to select the additional heating method:
    • Electric resistor
    • Liquid radiator
    • Not in use
  9. Select Right arrow.
  10. Use the Plus and Minus buttons to select Winter setting of Winter setting . The adjustment range is -20 °C - +20 °C. The factory setting is +20°C. The outdoor temperature is the winter setting of post-heating. When the outdoor temperature is lower than the set value, post-heating is used where needed to heat the supply air.
  11. Select Right arrow.
  12. Use the Arrow buttons to select HR cell:
    • Aluminium
    • Plastic
    • Enthalpy