Editing the At home mode settings

To edit the At home mode settings:

  1. Press the Change mode buttonuntil the At home mode icon appears on the display:
  2. Please wait until the main display of the At home mode opens:
  3. Select Mode information:
  4. Select Edit.
    The fan speed setup display opens:
  5. Use the Plusand Minus buttons to set the fan speed for this mode as a percentage of the maximum output ratio.
  6. Select Right arrow.

    The temperature setup display opens:

  7. Use the Plus and Minus buttons to set the desired supply air temperature for this mode.
    You can adjust the temperature in the range +5°C ... +25°C. The recommended temperature is +15°C or 2–3°C below the room temperature.
  8. Select Right arrow.

    The setup for automatic fan speed control based on the relative humidity of air opens.

  9. Use the Arrow buttons to select whether the automatic fan speed control, based on the relative humidity of air, is used or not.
  10. Select Right arrow.

    The setup for automatic fan speed control based on the carbon dioxide level opens.

  11. Use the Arrow buttons to select whether the automatic fan speed control, based on the carbon dioxide level, is used or not.
  12. Select OK.
The At home mode settings are now complete.