Lock code

The lock code is used to restrict access to the functions of the ventilation unit on different user levels. If the lock code inquiry is turned on and the user level is set to limited or normal, some of the settings can only be modified by first entering the lock code. When the lock code inquiry is turned on, the control panel display shows a lock icon. The lock code is a four-digit code.
Note: The default lock code is 0000, i.e. the lock code inquire is turned off.

To set the lock code:

  1. Select Edit.
  2. Enter the first digit of the lock code using the Up arrow and Down arrow buttons.
  3. Proceed to the next digit by selecting Right arrow.
  4. Set the remaining digits of the lock code in the same way.
  5. Select OK.
The lock code is now set.