Save and restore settings
To save or restore settings:
-
Select Settings.
-
Use the Arrow buttons to select Expert settings.
-
Select OK.
-
Use the Arrow buttons to select Save and restore
settings:
-
Select OK.
The Save and restore settings display opens:
-
Use the Up arrow and Down arrow buttons to select the saving or restoration option.
The options are:
- Save user's settings — This option saves any user settings you have made such as the fan speed and automatic daylight-saving time of the At home mode.
- Save setup settings — This option saves the settings made during setup. If the setup settings such as the ratio between the fans or the air flows are changed later, they will be saved in the setup menu.
- Restore user's settings — This option restores any user settings that have been saved earlier, including the fan speed and automatic daylight-saving time of the At home mode.
- Restore setup settings — This restores the unit’s setup settings. Restoration of the setup settings overwrites all user settings.
- Restore factory settings — This option restores the unit to the factory settings. If the factory settings are restored, the setup settings of the ventilation unit must be reconfigured.
- Air flow adjustment — Use this option when you wish to adjust the air flows of the unit after setup.Note:
The restoration of the setup settings and factory settings can cut the MyVallox Cloud service connection and the unit may need to be registered again.
-
Select OK.
-
The unit will request confirmation:
-
Select OK.