Editing the At home mode settings
To edit the At home mode settings:
- Select Operation menu.
-
Click on the At home
mode in the Ventilation modes area
to select it.
-
The basic settings of
the selected mode will be displayed:
- Select Edit in the right top corner of the area:
-
The ventilation mode display will open in the editing mode:
- Set the fan speed value for this ventilation mode as a percentage of the maximum by moving the blue Fan speed slider. If the slider is moved to the left, the fan speed value is reduced. If you move the slider to the right, the fan speed value is increased.
-
Set Set the desired supply air temperature for this
ventilation mode by moving the Supply air temperature
setting slider. If the slider is moved to the left, the
desired supply air temperature is reduced. If the slider is moved to the
right, the desired supply air temperature is increased.
You can adjust the temperature in the range +5°C ... +25°C. The recommended temperature is +15°C or 2–3°C below the room temperature.
-
Use the On/Off button on the right edge of the Humidity field to turn the automatic fan speed control based on the relative humidity
of air on or off.
- When the value is On, the automatic fan speed control is turned on.
- When the value is Off, the automatic fan speed control is turned off.
-
Use the On/Off button on the right edge of the Carbon dioxide
field to turn the automatic fan speed control based on the carbon dioxide level
on or off.
- When the value is On, the automatic fan speed control is turned on.
- When the value is Off, the automatic fan speed control is turned off.
- Select OK..