Installation of the Vallox Captura Cooker hood
The Vallox Captura cooker hood is installed on the bottom of Vallox 51K MV.
-
Remove the plug from the feedthrough seal of the condensing water tube of the cooker hood.
-
Lift the cooker hood and fit the hooks at the rear of the cooker hood into the holes at the bottom of the ventilation unit. Push in place.
- Ensure that the feedthrough seal of the condensing water tube sits firmly around the tube.
-
Lift the front of the cooker hood to fit the mountings into the penetrations in the bottom of the ventilation unit.
-
Fasten the M5 hexagon screws (2) through the mountings.
-
Lead the power cord and the control cable up along the cable channel. Wind approx. half a metre of the cables behind the cooker hood so that it can be removed for maintenance purposes where required.
-
Move the metal cover backwards so that it covers the opening between the cooker hood and the wall.
Important:
The minimum clearance between the bottom edge of the cooker hood and an electric stove is 426 mm.