Installing the MyVallox Control panel

  1. Attach the back of the control panel to the wall with screws as shown in Figure 1A or to the outlet box as shown in Figure 1B.
  2. Connect the electric wires to the control panel and to the ventilation unit’s external connection box as shown in Figures 2 and 3.
  3. Push the front cover of the control panel in place. You will hear a clicking sound when the cover locks into the bottom part.
  4. Connect the ventilation unit’s power plug to the mains. If the wires have been connected correctly, the ventilation unit and the control panel will start.

If the front cover of the control panel must be opened, first disconnect the ventilation unit from the mains. To open the front cover of the control panel, turn the locking claws at the bottom of the control panel 90° by using a screwdriver and pull the front cover out the bottom part first.