Installing the cooker hood

Cooker hood parts

1
Condensing water outlet
2
Exit hole for the condensing water outlet
3
Damper
A
Finger nuts
B
Connection cord
C
Line protection

The cooker hood is installed on the bottom of the ventilation unit with finger nuts (A), which are included in the accessory bag.

  1. Open the bottom plate of the cooker hood, on which the grease filter is mounted.
  2. Lift the cooker hood against the bottom of the ventilation unit. Feed the connection cord (B) at the same time inside the cooker hood.
  3. Fasten the hood in place with finger nuts.
  4. Pull the connection cord in place. Use line protection (C) where required.