Mounting on the wall
Note the following before mounting:
- The top of the unit must be at least 30 mm below the ceiling. However, it should be noted that when a wall mounting plate is used, the unit will be located 10 mm above the final mounting height.
- When no protective enclosure is used, the unit must be located in a place where the noise does not disturb anyone (e.g. storage premises or a technical space).
- When installing the unit, reserve a space of at least 330 mm in front of the unit for servicing purposes.
There are two unit models, left- (L) and right-handed (R). In the right-handed version, outdoor air comes into the unit from the right. In the left-handed version, outdoor air comes into the unit from the left. The location of the filters, the bypass damper, and the heating radiator is also mirrored in the left-handed model.
The ventilation unit should be installed as shown in the picture when the wall mounting plate is used. Make sure that the unit is horizontally level after mounting.