Mounting on the floor (Vallox 145 MV)

Vallox 145 MV can also be mounted on a base on the floor.

The base is optional. Mount the ventilation unit on the wall with a mounting plate, as shown in the adjacent figure.

Note: Mount the ventilation unit in a place where the temperature does not fall below +10°C.

Measurements and parts of the base

A
Thread bar M8x35, shorter thread upwards
B
The length of the adjusting screw is 37 mm
  1. Adjust the base with adjusting legs to level it.
  2. Remove the rubber plugs (4 pcs) at the bottom of the unit.
  3. Place the unit on top of the base so that the bars of the base fit in the holes at the bottom of the unit.
Make sure that the unit is horizontally level after mounting.