Modifying the Fireplace profile settings
To edit the Fireplace profile settings:
-
Press the Change profile button
until the Fireplace profile icon appears on the display: 
-
Wait until the display of the Fireplace profile appears:
-
Select Profile information:
-
Select Edit:
The fan speed setup display opens:
-
Use the Plus and Minus buttons to set the Fireplace profile timer duration in hours and minutes. This value indicates how long Fireplace will be turned on.
-
Select Right arrow.
A display for setting the profile supply air fan speed opens.
-
Use the Plus and Minus buttons to set the supply air fan speed of the Fireplace profile as a percentage of the maximum output ratio.
Tip
It is recommended that a higher supply air fan speed be used in the Fireplace mode to create overpressure in the ventilation zone. Reducing the extract air fan speed is not recommended.
-
Select Right arrow.
A display for setting the profile extract air fan speed opens.
-
Use the Plus and Minus buttons to set the extract fan speed of the Fireplace profile as a percentage of the maximum output ratio.
-
Select Right arrow.
A display for setting the profile timer opens.
-
Use the Plus and Minus buttons to select whether the profile timer function is used or not. The options are:
-
On — When the timer is on, the Fireplace profile is used only for the period specified in the timer.
-
Off — When the timer is off, the Fireplace profile is used until you (or the week clock) change the profile.
Important
Do not turn the timer function off if there is no timer in the external fireplace switch.
-
-
Select OK:
The Fireplace profile settings are now complete.