Thank you for choosing a Vallox product. To ensure optimal operation, read the manual carefully before using the product. All Vallox ventilation units have been designed to provide appropriate and continuous ventilation so as to present no threat to the health of people and to maintain structures in good condition.
In order to ensure that the indoor air presents no harm to health and remains optimal for the structures of the building, ventilation must be kept on without disruptions. It is recommended that ventilation be left turned on during long holidays also. This keeps the indoor air fresh and prevents humidity from condensing in the ventilation ducts and structures. It also reduces the risk of moisture damage.
For more information on Vallox and for contact details, go to www.vallox.fi.
These instructions apply to the following Vallox ventilation unit models:
Vallox 90 MV
Vallox 90K MV
Vallox 096 MV
Vallox 101 MV
Vallox 110 MV
Vallox 145 MV
Vallox 245 MV
Vallox TSK Multi 50 MV
Vallox TSK Multi 80 MV
Operation of the Vallox ventilation unit can be controlled by the following means:
Through the control panel installed in the building
Through the MyVallox Home local network connection and the MyVallox Home/Cloud user interface
Through the MyVallox Cloud cloud service and the MyVallox Home/Cloud user interface
Through a remote monitoring service or building automation that uses voltage signals or Modbus messages
In addition to the integrated humidity sensor, ventilation can also be adjusted automatically using the optional carbon dioxide and humidity sensors. When these are used, ventilation remains optimal even when the dwelling is unoccupied. The standard equipment and available accessories vary from country to country.
Each user can use the week clock to adjust the ventilation to fit their individual lifestyle.
The unit is not intended for use by children under 8 or by persons with reduced sensory, physical or mental capabilities, or whose lack of knowledge and experience do not ensure safe operation of the unit.
Such persons can use the unit under supervision, or by following the instructions of someone who is responsible for their safety.
The MyVallox Control control panel automatically switches to the sleep mode when the pre-set Sleep time has elapsed. To reactivate the MyVallox Control control panel, press any button.