The week clock allows you to pre-set a weekly ventilation program for the ventilation unit. For each hour of the week, one of the following profiles can be configured:
-
At home — The At home profile is used.
-
Away — The Away profile is used.
-
Boost — The Boost profile is used.
-
Blank — Do not change the profile.
The week clock is shown in the figure below:
Note
If you change the profile manually when the week clock is on, the selected profile will be active until the week clock switches to the next profile in the program.
If the humidity or carbon dioxide sensors control the ventilation, they will adjust the fan speed, regardless of whether the profile has been manually selected or selected by the week clock.