Tip
Use the Right arrow button to view the Fireplace profile settings.
To make the Fireplace profile settings:
-
The Fireplace profile display of the setup wizard opens:
-
Use the Plus and Minus buttons to set the profile timer duration in hours and minutes. This value indicates the duration of enhanced ventilation when the Fireplace profile is activated.
-
Select Right arrow.
-
A display for setting the profile supply air fan speed opens.
-
Use the Plus and Minus buttons to set the supply air fan speed of the Fireplace profile as a percentage of the maximum output ratio.
Note
It is recommended that a higher supply air fan speed be used in the Fireplace mode to create overpressure in the ventilation zone. Reducing the extract air fan speed is not recommended.
-
Select Right arrow.
-
A display for setting the profile extract air fan speed opens.
-
Use the Plus and Minus buttons to set the extract fan speed of the Fireplace profile as a percentage of the maximum output ratio.
-
Select Right arrow.
A display for setting the profile timer opens.
-
Use the Plus and Minus buttons to select whether the profile timer function is used or not. The options are:
-
On — When the timer is on, the Fireplace profile is used only for the period specified in the timer.
-
Off — When the timer is off, the Fireplace profile is used until you (or the week clock) change the profile.
-
-
Select OK:
The Fireplace profile settings are now complete.